Cash & Document Transfer Facilities
Type RDT - Rotating document/cash passing tray

Cash & Document Transfer Facilities

D.W. Price Security offer a comprehensive range of cash passing trays and units for the safe transfer of money and items into a secure area.

 

Cash/Document Passing Trays

Type DT1 - 25 mm document passing tray

Dimensions
Overall size 305 × 410 × 25mm deep
Cut out required 270 × 380 × 28mm deep
Options available
  • Bullet resistant shot box to required specification
  • Non-standard sizes to order
Image 1 of 2 >

Type DT2 - 114 mm document passing tray

Dimensions
Overall size 350 × 405 × 114mm deep
(incorporating polycarbonate sliding top)
Cut out required 320 × 370 × 120mm deep
Options available
  • Bullet resistant shot box to required specification
  • Non-standard sizes to order
Image 1 of 2 >

Type DT4A - Audio cash scoop

Dimensions
Overall size 430 × 360 × 110mm deep
Cut out required 415 × 345 × 115mm deep
Tray width 255mm
Tray depth 50/100mm
(incorporating polycarbonate top)
Audibility controls
  • Power on/off
  • Clerk mute
  • Induction test
  • Volume boost
Additional info
  • Supplied complete with 13amp plug for connection to local spur
  • Amplifier unit required to be installed local to unit
Image 1 of 3 >

Type RDT - Rotating document/cash passing tray

Dimensions
Overall size 430 × 445 × 120mm W×H×D
Cut out required 415 × 430 × 120mm
Table dimension 350mm diameter
Transfer height 60mm
Specification
Anti-bandit only
Operation
  • Push handle to operate sprung loaded rotation of tray
  • Automatic locking in closed position
Image 1 of 2 >

Bulk transfer units

Lever action hydraulically dampened

Dimensions
Overall flange 605 × 865mm
Internal operating space 355 × 457 × 285mm
Specification

Generally constructed from mild steel with a black polyester powder coat finish, the principle of use of the unit is to pass large amounts of cash quickly and safely through a wall, door or reinforced partition to a secure working area.

the unit is controlled from the inside by an operating lever with hydraulically operated damper to reduce closing speed when the unit is full of cash. a gravity latch prevents the unit from operating unless released from the inside with a lockable rear door to withdraw the cash from inside.

The unit is fixed by a steel flange on exterior of the unit and adjustable flange on the inside, both of which are bolted together.

Image 1 of 5 >

Electronic transfer units

DWP A100 & DWP BT4

Dimensions
A100 Overall 474 × 380 × 650mm W×H×D
A100 Pass through capacity 410 × 240 × 570mm W×H×D
BT4 Overall 820 × 690 × 850mm W×H×D
BT4 Pass through capacity 500 × 400 × 850mm W×H×D
Maximum wall thickness 495mm
Resistance specification
BS5051G2/S86
Specification

For safe and easy transfer of larger items from a non-secure area directly through a wall or counter up to 495mm thick

Operation is by push button, which releases solenoid latches to open either the inner or outer door and incorporates an electric interlock ensuring only one door can be open at any one time

Standard finish
Metallic silver, polyester powder coated
Options
  • Vision panels above, fixed or with speech and document passing facilities
  • Alternative finishes including RAL/BS paint colours or stainless steel front door and fixing flange
  • Roller bed to replace standard flat bed (standard on DWP BT4)
  • Support frame
  • Remote push button panel with cables and DIN plugs
  • Non-standard sizes
Image 1 of 2 >

This publication gives a general description of the product and materials. It is the responsibility of the user to ensure that their use is appropriate for any particular application and that such application complies with all relevant local and national legislation, standards, codes of practice and other requirements. D.W. Price (Security) Ltd hereby disclaim all liability however arising from any error in or omission from this publication and for all consequences of relying on it.